Joinwin Electronics HK Limited518031About Join WinJoinwin Electronics HK Limited FLAT/RM 29, 22/F, YAN’S TOWER, 25-27 WONG CHUK HANG ROAD,ABERDEEN HONGKONG Shenzhen ZhongYiYingTong Technology Limited Room 1610, Block A, Overseas Decorative Building, Zhenhua Road,Huaqiang North Street, Shenzhen, 518031Join-Win will be your one-stop purchasing assistant. Join together, achieve win-win!Joinwin Electronics HK Limited518031About Join WinJoinwin Electronics HK Limited FLAT/RM 29, 22/F, YAN’S TOWER, 25-27 WONG CHUK HANG ROAD,ABERDEEN HONGKONG Shenzhen ZhongYiYingTong Technology Limited Room 1610, Block A, Overseas Decorative Building, Zhenhua Road,Huaqiang North Street, Shenzhen, 518031Join-Win will be your one-stop purchasing assistant. Join together, achieve win-win!Joinwin Electronics HK LimitedJoinwin Electronics HK LimitedJoinwin Electronics HK LimitedJoinwin Electronics HK LimitedJoinwin Electronics HK LimitedJoinwin Electronics HK LimitedJoinwin Electronics HK LimitedJoinwin Electronics HK LimitedJoinwin Electronics HK LimitedJoinwin Electronics HK LimitedJoinwin Electronics HK LimitedJoinwin Electronics

Home
News
Solder Fume Extractor For PCB Electronics Industry Can Bring What?

Solder Fume Extractor For PCB Electronics Industry Can Bring What?

August 23 , 2023 0

Solder Fume Extractor is also called solder fume purification processor, with the increasingly mature technology of solder smoke purification equipment, has become a standard equipment in the electronic welding shop, in a variety of PCB manufacturing workshop a variety of manual soldering, tin furnace, reflow soldering and other equipment widely used. Why in just a few years the solder smoke purifier is accepted by the electronics industry, it in the end can bring what for the enterprise?

Uses Of Solder Fume Extractor

Effectively Improve The Cleanliness Of The Welding Workshop Air

As we all know, soldering work will produce a lot of smoke, odor, the smoke contains not only 95% of the fine particles, and the other 5% for the flux, solder and other harmful chemical oxidizing gases. Therefore, in the welding shop, welding station installation of solder smoke purifier can effectively purify the smoke, odor, the source of harmful smoke generated in a timely manner to deal with the workshop air cleanliness can be restored.

Can Shorten The Replacement Cycle Of Welding Equipment　　

Tin welding equipment using welding smoke purifier can be timely collection and disposal of smoke and dust, reduce the corrosiveness of smoke and dust on the equipment, can effectively extend the service life of the equipment, increase the life cycle of the equipment, reduce the investment of enterprises. The difference between the soldering fume purifier and the traditional smoking machine is that he can be moved to adapt to the production of different workpieces at different stations. Manual soldering used by the solder fume purifier will generally be equipped with removable suction arm, in the case of the equipment does not do any movement, you can move with the welding station to change the smoking position, to avoid the workplace changes in the dust collector also changed the additional costs.

The Use Of Smoke Purifier Cost Reduction:

Smoke purifier and traditional exhaust extraction ducts compared to the smoke purifier, although the initial investment equivalent to the traditional extractor fan to be expensive, but in the subsequent use, maintenance costs on the smoke purifier is very cheap. Shrink to see the solder smoke purification sex ratio is much higher than the traditional smoke extractor.

Effectively Improve The Corporate Image

The use of solder fume purifier represents the improvement of industrial automation level standard, the use of advanced production support equipment, reflecting the advanced environmental protection capabilities and qualification capabilities of enterprises, so that our corporate image rose to a higher level, so that our customers trust us more, thus improving the competitiveness of our enterprises.

What Is Solder Fume Extractor

Welding fume purifier is a dust removal equipment for welding fume purification, for the welding shop plays a vital role, but welding fume purifier is good to use, but also in the use of the time but also to pay attention to, otherwise the service life of the welding fume purifier will be greatly reduced.

First of all, when in use, should be placed on a level ground, and remember to lock the casters, or when the equipment starts, will produce shaking.

Again, welding fume purifier must be away from open flame, open flame has been the enemy of welding fume purifier, although our purifier has been installed inside a layer of fire-resistant mesh, the canister is also made of fireproof material, for the sparks generated by the welding is not a problem, but it does not mean that it will not be on fire, if the open flame is really led to the equipment, then the whole welding fume purifier can only be scrapped.

Also, in the use of welding fume purifier, must be oil-proof, whether it is the welding material surface coated with a layer of oily substances, or the use of anti-spatter agent, flux-cored wire, must be informed in advance of our technicians, we can do ahead of time to deal with, or volatile oily substances will be clogged canisters, welding fume purifiers will be lost to purify the welding fume effect.

Finally, it must be remembered that if the welding fume purifier malfunction, please contact a professional for repair in a timely manner, do not disassemble, so as not to create new problems.